Methods to Construct Planter Posts for String Lights
Our household likes to loosen up on the patio, and now it has some severe ambiance due to my newest DIY mission: planter posts for string lights!
They’re super-easy to make. You simply want Quikrete Quick-Setting Concrete Combine, within the purple bag, a few planters and string lights, and small instruments.
Able to create one thing particular? Let’s go!
What You’ll Want:
- Luggage of Quikrete Quick-Setting Concrete Combine (per submit)
- 2-4 Planters (sufficient to help the café lights)
- 4-by-4 Posts (sufficient to help the lights)
- Metal Screw Hooks
- Café lights
- Methods to Construct Planter Posts for String Lights
Seal the insides. You received’t need potting soil or concrete combine to spill out of your planters (I used wooden), so apply Superior Polymer Non-Sag Sealant or Superior Polymer Building Adhesive to shut any gaps or cracks inside them.
Discover a location. Place the planter the place will probably be used. Be sure that it’s the place you’ll spend a whole lot of time and will use a bit of mild. (I simply need to stress: It is a everlasting placement. You received’t need to transfer the planter after it has concrete in it!)
Place the submit. Add a 4-by-4 submit on the heart of the planter. (I stored mine the total size of 8 toes.) You may eyeball it or test that every side-to-side measurement is similar.
Pour the concrete. Slowly pour two baggage of Quikrete Quick-Setting Concrete Combine round your submit in order that it’s evenly distributed.
Slowly add water. You’ll want roughly one gallon of water per 50-pound bag of concrete. The wonderful thing about Quick-Setting Concrete is you don’t want to combine it round. Simply pour within the concrete and add the water — straightforward peasy!
Degree it. Whereas the concrete is setting however nonetheless unfastened, use a stage to test that every planter submit for string lights is completely plumb. It shouldn’t be leaning in both path.
Repeat steps 1-6. If you happen to want a second planter to help your string lights, repeat these steps whereas the primary one dries. By the point the second is drying, the primary one shall be prepared for the subsequent step: hooks!
Add hooks. Up to now, we’ve received planters with posts secured in concrete. Now we have to create the help system for our string lights. Use a tiny drill bit to begin a pilot gap on the nook of your submit. Then connect a metal screw hook.
You may create 4 planter posts (organized in a sq. or rectangle) to help the string lights, or drill two pilot holes into your property’s facia to attach the lights from the planters.
Create drainage. Whilst you have your drill bit in your drill, add a small drainage gap on the bottom of your planter, above the concrete.
Insert crops. Add potting soil and plant some fairly crops. You may hold it easy with one plant per planter or, for eye-catching outcomes, go ‘additional’ and create a ‘thriller, filler, spiller’ association. (Google it!)
That’s all it takes to make planter posts for string lights! Now, household gatherings on the patio have only a bit extra environment so you can also make extra recollections collectively.
Add lights. Lastly, drape your string lights over the hooks and plug them in.